1 litre biodegradable MWR filter cleaner. How to clean your MWR filter: submerge in cleaner for 30 minutes, wash in warm soapy water, rinse with clean water, allow to dry, then oil both sides with filter oil.
GB Racing engine cover set Ducati Panigale V4(S) koppeling en dynamo
GB-racing engine covers. Revolutionair nieuw zeer sterk high-impact composiet materiaal gemaakt van 60% lang glasfiber nylon. Wordt bevestigd met bijgeleverde bouten, dus er hoeft niet
MOTION PRO Coolant Recovery Tank 275cl. The Motion Pro Coolant Recovery Tank is a useful accessory for many riders. For the off road rider, the tank helps prevent the loss of coolant on long hot rides, protecting your engine. For racers, a coolant recover
After three years of research and development, the introduction of CDT Group?۪s FullSix One-Piece Fuel Tanks marks a new generation and evolution in the manufacturing carbon fiber parts. Developed in conjunction with the Jo?_ef Stefan Institute, Slovenia?
FullSix carbon fiber Monocoque Tail sections are structural components used in professional racing to reduce weight. A replacement for stock aluminum subframes, Fullsix monocoque tail sections utilize its' proprietary Autoclave Composite Monocoque (ACM) t
I2M Brake Sensor 0-100 Bar bar pressure sensor. It is used for measuring the braking system pressure. The analog output voltage, linear between 0 and 5V, makes it compatible with all data acquisition systems. It allows you to understand HOW and how much y
PZRacing A2-Tronic AP701 adds 50Hz GPS lap timing through the original dashboard. Includes Wi-Fi, racing-line and speed logging and RacePro analysis. Check the model-specific application list.
The PZRacing RREK101 is an exhaust gas temperature signal interface. It conditions the thermocouple signal for a suitable measurement system and is paired with the SSEK100 sensor in the KITEK100 kit.
The PZRacing RRBK02 is the mounting kit with a 1/8-inch connection for brake-pressure measurement. It is the mounting component offered with the SSPS069 pressure sensor in the KITBK02 kit.
The PZRacing SSPS069 is a pressure sensor with a range up to 69 bar for a suitable data logger. This version is also used in the KITBK02 brake-pressure kit. Pressure range: up to 69 bar.
The PZRacing SSY150 is a Y-cable for connecting two temperature channels simultaneously to the Start Plus ST400-P: one NTC sensor and one thermocouple. It is 150 cm long and specifically intended for this dashboard.
The PZRacing BCAN-TM01 reads vehicle parameters from the ECU over CAN bus. This version is intended for the listed TM 250 and TM 450 models and supplies available vehicle data to a suitable PZRacing measurement system.
BT Moto Stage 1+ ECU flash with handheld tuner for Kawasaki 1100SX 2025-2026. Model-specific calibration for refined engine response and power delivery. Includes original mapping storage and diagnostic functions through the handheld.
Having an account with us will allow you to check out faster in the future, store multiple addresses, view and track your orders in your account, and more.