MOTUL Motul Factory Line Chain Maintenance Kit (C1 + C4 + Brush)

The Motul Factory Line Chain Maintenance Kit contains everything you need for a complete, professional chain cleaning and lubrication. The kit is built around Motul's race-grade Factory Line, used by teams in MotoGP, World Superbike and international endurance racing.

What's in the kit

• Motul C1 Chain Clean — 400 ml. Powerful chlorine-free chain cleaner that removes all embedded deposits: dust, mud, sand, oil and old grease. Evaporates quickly and leaves no residue. Safe for O-ring, X-ring and Z-ring chains.
• Motul C4 Chain Lube Factory Line — 400 ml. Race-grade chain spray developed for competition use. Excellent adhesion, long-lasting lubrication and protection, withstands high loads and high speeds.
• Dedicated cleaning brush. Non-aggressive brush to mechanically remove stubborn dirt without damaging the seal rings or the chain surface.

How to use

1. Shake the C1 Chain Clean well before use and spray it around the chain.
2. Allow the product to act for 5 minutes.
3. Gently brush off stubborn dirt with the supplied brush. Spray again if needed.
4. Let the chain dry completely.
5. Apply Motul C4 Chain Lube Factory Line evenly to a warm chain. Let it soak in for a few minutes before riding.

Key features

• Complete solution in one kit — cleaner, lube and the right tool
• Race-grade Factory Line lubrication, used in MotoGP and WSBK
• Chlorine-free formula — safe for seal rings
• Suitable for O-ring, X-ring and Z-ring chains
• Ideal for road, sport and track motorcycles
• Recommended maintenance every 1,000 km

Pro tip: Clean and lubricate your chain after every wet ride and at least every 1,000 km. A well-maintained chain lasts significantly longer, runs smoother and saves you a lot on chain and sprocket replacement in the long run.