Translogic Translogic QSXi Intellishift Quickshifter – Kawasaki Quickshifter voor Ninja 250R and Ninja 300R modellen 2013 en later (fuel injected) met standaard straat-schakel or inverted race shift gear lever set-up

Translogic QSXi Intellishift quickshifter for the Kawasaki Ninja 250R and Ninja 300R 2013 onwards (fuel injected).

Can be used with the standard road pattern (1 down, 5 up) and with the reversed race pattern (1 up, 5 down).

On an upshift the QSXi interrupts ignition cylinder by cylinder rather than pulling the signal to ground. That is kinder to the original ECU and gives a cleaner shift. The electronics adapt the interrupt to engine speed and load, so a shift at low revs is as clean as one at full throttle.

Setting up happens on the ECU itself: sensor trigger force and interrupt time per channel. No laptop, phone or dyno time involved.

Supplied with: QSXi Intellishift ECU, DCS shift sensor and the matching tie-rod or tie-rod kit.

Only suitable for fuel-injected engines with +12 volt coils, not for CDI ignition systems. Check that your bike matches the description above before ordering.