Translogic Translogic QSXi Intellishift Quickshifter – Kawasaki ZX4R, ZX6, ZX7R, ZX9 and ZZR 2003 and earlier

Translogic QSXi Intellishift quickshifter for the Kawasaki ZX4R, ZX6, ZX7R, ZX9 and ZZR 2003 and earlier.

Can be used with the standard road pattern (1 down, 5 up) and with the reversed race pattern (1 up, 5 down).

• Only for versions with two +12 volt coils, not for four-coil CDI systems. Check before ordering.

On an upshift the QSXi interrupts ignition cylinder by cylinder rather than pulling the signal to ground. That is kinder to the original ECU and gives a cleaner shift. The electronics adapt the interrupt to engine speed and load, so a shift at low revs is as clean as one at full throttle.

Setting up happens on the ECU itself: sensor trigger force and interrupt time per channel. No laptop, phone or dyno time involved.

Supplied with: QSXi Intellishift ECU, DCS shift sensor and the matching tie-rod or tie-rod kit.

Only suitable for fuel-injected engines with +12 volt coils, not for CDI ignition systems. Check that your bike matches the description above before ordering.

Manufacturer part number: TLS-QSXi-C-DCS