Translogic Translogic QSXi Intellishift Quickshifter – Kawasaki Z900 2017 onwards

Translogic QSXi Intellishift quickshifter for the Kawasaki Z900 2017 onwards.

Can be used with the standard road pattern (1 down, 5 up) and with the reversed race pattern (1 up, 5 down).

On an upshift the QSXi interrupts ignition cylinder by cylinder rather than pulling the signal to ground. That is kinder to the original ECU and gives a cleaner shift. The electronics adapt the interrupt to engine speed and load, so a shift at low revs is as clean as one at full throttle.

Setting up happens on the ECU itself: sensor trigger force and interrupt time per channel. No laptop, phone or dyno time involved.

Supplied with: QSXi Intellishift ECU, DCS shift sensor and the matching tie-rod or tie-rod kit.

Only suitable for fuel-injected engines with +12 volt coils, not for CDI ignition systems. Check that your bike matches the description above before ordering.

Manufacturer part number: TLS-QSXi-YK-DCS-85